If you are considering refinishing your floor, it is important to ensure you are working with the right professionals. City and Suburban Floor Sanding Co. know how to sand your floor properly and can give you a quality finish. You should also be aware that if you don’t sand your floors properly, you may cause damage.
If you have your wooden floor professionally sanded, there are several things you should do before you start. These include cleaning the area, applying protective equipment, and preparing the floor. It’s important to wear protective clothing such as NIOSH-approved organic vapor respirators, a facemask, and a dust mask. These are all essential to avoid breathing in the fumes of the sanding machine.
Once you’ve taken the necessary precautions, it’s time to move furniture and remove curtains from windows. Having these items out of the way will help prevent interruptions during the sanding process. It would be best if you also considered covering any gaps between the floorboards. These are common places for splinters. You can fill them with putty or caulk.
You’ll also need to cover up any shelves, mantels, or doors. Use masking tape to protect these areas. However, be careful not to stick the tape too far into the wall. You don’t want to leave a sticky residue that could damage the paint. Applying a fresh coat of wax is the best way to get a shine back. However, this doesn’t do much for scratched or damaged floors. Sanding is the better alternative. This is because it will sand away any loose or soiled coatings, which makes it easier to apply a fresh layer of polish.
There is more to sanding than meets the eye. For instance, sanding a wood floor can take up to eight sandings to do the job. A good rule of thumb is to only sand thin floorboards two to three times during the lifetime of the floor. Using too much sanding power could cause them to crack, or even crater, which is not something you want.
Sanding a floor may be daunting, but you can do it with a little know-how. It can also be cheaper than hiring a professional, although you will still need to purchase the chemicals and tools required to get the job done right. This is especially true if you plan to replace your flooring. Refinishing your hardwood floors is a great way to make your floor look better while saving money. But before you start refinishing, you should know a few things about the process.
A typical refinishing job involves sanding the top layer of the floor to remove scratches. Then, you apply a new stain or lacquer. Some floors need to be refinished multiple times, but the cost is usually much lower than replacing them. When you replace a floor, you’ll need to buy new wood, which can be expensive. You might also have to pay for labor. You can buy prefinished wood planks, which are easier to install and require less work afterward.
Refinishing costs about two to six dollars per square foot. However, some materials can add up to a few hundred dollars. The type of wood you have is a big factor in determining your total cost. The price may be higher if you have an exotic type of wood. Screen and re-coat is a method used to restore the shine to worn hardwood floors. It is a faster, easier, and cleaner alternative to full sanding. The process involves abrading the existing finish and applying a new coat of polyurethane.
This method is not recommended for pre-finished hardwoods with aluminum oxide finishes. However, it can be used on engineered wood. It can also be a great way to protect your floor from scratching. Before you start, make sure that the floor is completely free of wax and dirt. You may have to sand some parts of the floor. You should also test for oil and acrylic-based polishers.
After cleaning the surface, apply the new coating. It would be best if you allowed it to dry for at least 24 hours. Once the drying time is over, you can move the furniture back in place. If there are any problems, you can hire a professional. When you use the screen and re-coat method, you should keep in mind that it is not intended to repair deep scratches. It does not remove moderate scratches.